NMR measurement of bitumen at different temperatures

Heavy oil (bitumen) is characterized by its high viscosity and density, which is a major obstacle to both well logging and recovery. Due to the lost information of T2 relaxation time shorter than echo spacing (TE) and interference of water signal, estimation of heavy oil properties from NMR T2 measurements is usually problematic. In this work, a new method has been developed to overcome the echo spacing restriction of NMR spectrometer during the application to heavy oil (bitumen). A FID measurement supplemented the start of CPMG. Constrained by its initial magnetization (M0) estimated from the FID and assuming log normal distribution for bitumen, the corrected T2 relaxation time of bitumen sample can be obtained from the interpretation of CPMG data. This new method successfully overcomes the TE restriction of the NMR spectrometer and is nearly independent on the TE applied in the measurement. This method was applied to the measurement at elevated temperatures (8-90 degrees C). Due to the significant signal-loss within the dead time of FID, the directly extrapolated M0 of bitumen at relatively lower temperatures (<60 degrees C) was found to be underestimated. However, resulting from the remarkably lowered viscosity, the extrapolated M0 of bitumen at over 60 degrees C can be reasonably assumed to be the real value. In this manner, based on the extrapolation at higher temperatures (> or = 60 degrees C), the M0 value of bitumen at lower temperatures (<60 degrees C) can be corrected by Curie's Law. Consequently, some important petrophysical properties of bitumen, such as hydrogen index (HI), fluid content and viscosity were evaluated by using corrected T2.     

Numerical study of a well boat operating at a fish farm in current

Dynamic response of a well boat operating at a fish farm in current is investigated numerically. An objective is to determine the operational conditions of the well boat. In terms of the fish farm, a realistic set-up (with single cage) is considered, including a floating collar, an elastic sinker tube, a flexible-closed net cage and a complex mooring system. A time-domain solution is used to find the steady configuration and response. Transverse viscous current loads are estimated using the cross-flow principle. The drag coefficients are obtained empirically by considering cross-sectional details, free surface and three-dimensional (3D) flow effects. The drag force is experimentally validated. The effect of the ship wake on the net loading is also assessed.The most critical scenario with the well boat placed at the weather side of the fish farm is analyzed in detail. Critical response variables for operational limits are the maximum anchor-line tensions and floater stresses. Numerical results show that the anchor loads will increase more than 40% in small current velocities and up to 90% in high current velocities due to the viscous current loads on the boat. There is also a strong increase of the floating collar deformations and stresses when the well boat is in contact with the floating collar.A sensitivity analysis has been carried out to identify the physical parameters affecting the anchor loads and the maximum stress in the floating collar. From our studies, the anchor loads are more sensitive to current direction, bottom weight system, sinker tube depth and mooring line properties (pretension load, anchor chain weight, etc.) and less sensitive to other parameters such as floating collar stiffness and cross-sectional drag coefficients of the well boat. The shading effect of the well boat on the fish-farm inflow has been examined and appeared not negligible with 4% to 10% reduction of the anchor loads for the studied current conditions. The maximum stress in the floating collar is sensitive to well-boat loads related parameters (current direction, cross-sectional drag coefficient) and pretension load in the anchor line; not so sensitive to net loading related parameters such as sinker tube depth and sinker tube weight.Lastly, the operational conditions of the well boat at the fish farm were discussed. Numerical results show that the maximum stresses in the floating collar should be of major concern. The loads in the mooring lines are moderate compared with the corresponding breaking limits.     

Highly selective molecular recognition and high throughput detection of melamine based on molecularly imprinted sol-gel film

Multimode reader has been generally applied in immunoassay, and in the proposed paper, the 96 well micro-plate was modified with molecularly imprinted melamine sol-gel film, based on which the highly selective and high throughput detection of melamine was achieved. Melamine was imprinted into silica sol-gel films directly using phenyltrimethoxysilane and methyltrimethoxysilane as functionalized organosilicon precursors. The binding characteristic of the imprinted film to melamine was evaluated by equilibrium binding experiments and the morphology was studied by scanning electronic microscope (SEM). Scatchard analysis was carried out to estimate the binding parameters of the imprinted film. The proposed method exhibited excellent selectivity because of specific recognition of MM by molecularly imprinted film. Under the optimum conditions, the chemiluminescence (CL) intensity had a linear relationship against the concentration of melamine over the range of 0.1-50 μg mL⁻¹ with a lower detection limit of 0.02 μg mL⁻¹.     

Theoretical and experimental evaluation of screen-printed tubular carbon ink disposable sensor well electrodes by dc and Fourier transformed ac voltammetry

Mass-produced, screen-printed, carbon-ink-based microtubular band (well) electrodes, suitable for routine sensing applications, have been fabricated and evaluated with respect to their theoretical and analytical performance. Microscopic examination of the electrode surface reveals they are inherently rough and could easily suffer from high and variable resistance, capacitance and area, unless care is taken to minimise these problems. Simulation models have been applied to analyse cyclic voltammetric responses obtained at the well electrodes. Results of these theoretical calculations further demonstrate the care needed with electrode design and resistance in carbon ink electrodes. Substantial differences in voltammetry when wells are produced by mechanically punching or laser drilling are considered. The application of multi- and single-frequency Fourier Transform ac voltammetry, previously applied to planar carbon ink disc electrodes for quality control purposes, is now demonstrated with respect to the microtubular band electrode geometry. Theoretical and practical limitations are discussed, as is the analytical application to the reversible redox couple in the presence of oxygen in aqueous solution. Dedicated to Keith on his 80th birthday, a good friend and colleague.     

Quantales的代数余核和子Quantales

在研究代数余核的一些性质的基础上,得到了Quantales的映射构成代数余核的条件;同时证明了由wellinside关系生成的某种集是子Quantale．     

BCH-代数的闭模糊理想

引入了BCH-代数的闭模糊理想、子代数及优BCH-代数的概念,讨论它们的性质,获得若干结果。     

Well‐posedness of fractional degenerate differential equations with finite delay on vector‐valued functional spaces

We study the well‐posedness of the fractional degenerate differential equations with finite delay on Lebesgue–Bochner spaces , periodic Besov spaces and periodic Triebel–Lizorkin spaces , where A and M are closed linear operators on a Banach space X satisfying , F is a bounded linear operator from (resp. and ) into X, where is given by when and . Using known operator‐valued Fourier multiplier theorems, we give necessary or sufficient conditions for the well‐posedness of in the above three function spaces.     

Speciation analysis of arsenic in groundwater from Inner Mongolia with an emphasis on acid-leachable particulate arsenic

Arsenic in drinking water affects millions of people around the world. While soluble arsenic is commonly measured, the amount of particulate arsenic in drinking water has often been overlooked. We report here determination of the acid-leachable particulate arsenic and soluble arsenicals in well water from an arsenic-poisoning endemic area in Inner Mongolia, China. Water samples (583) were collected from 120 wells in Ba Men, Inner Mongolia, where well water was the primary drinking water source. Two methods were demonstrated for the determination of soluble arsenic species (primarily inorganic arsenate and arsenite) and total particulate arsenic. The first method used solid phase extraction cartridges and membrane filters to separate arsenic species on-site, followed by analysis of the individual arsenic species eluted from the cartridges and filters. The other method uses liquid chromatography separation with hydride generation atomic fluorescence detection to determine soluble arsenic species. Analysis of acidified water samples using inductively coupled plasma mass spectrometry provided the total arsenic concentration. Arsenic concentrations in water samples from the 120 wells ranged from <1 to ∼1000 μg L⁻¹. On average, particulate arsenic accounted for 39 ± 38% (median 36%) of the total arsenic. In some wells, particulate arsenic was six times higher than the soluble arsenic concentration. Particulate arsenic can be effectively removed using membrane filtration. The information on particulate and soluble arsenic in water is useful for optimizing treatment options and for understanding the geochemical behavior of arsenic in groundwater.     

引入阱结构改善有机发光器件的效率

利用阱结构作为发光层,阱由8-羟基喹啉铝和 4,4′-N,N′–dicarbazole-biphenyl交替蒸发长成，改善了器件的效率,这归因于增加空穴和电子在薄发光层的堆积，形成的激子有效地被限制在薄的发光层中发光.器件的最大电流效率在外加电压8V时达到4.1cd/A,与一般异质结器件相比效率提高了2倍多.这说明在适当阱数时用简单办法可提高器件的效率.